Products

1" Low Sheen Black Finishing Trim for Vector 50 / Acies 50 A finishing trim adds the final touch that turns your fireplace into a true focal point. This 1" low sheen black trim frames the Napoleon Vector 50 or Acies 50 for a p...

1" Stainless Steel Finishing Trim for Vector 50 / Acies 50 A finishing trim adds the final touch that turns your fireplace into a true focal point. This 1" stainless steel trim frames the Napoleon Vector 50 or Acies 50 for a p...

130 CFM Blower With Variable Speed Control (Thermodisc Included) A heat-activated 130 CFM blower with variable speed control that circulates warm air from your Osburn unit into the room for faster, more even heating. Thermodis...

2" or 4" Projection Kit For Insert A projection kit that extends your Osburn insert 2" or 4" out from the masonry opening, dialing in the right hearth depth and appearance for your installation.SPECIFICATIONS Type: Projection ...

2"Ø x 25' Anti-Static Flex Hose Anti-static flexible hose that carries pellets through the pneumatic self-feeding system from the bulk storage tank to your Osburn 2500 pellet stove. 2" diameter, 25 ft length.SPECIFICATIONS Dia...

29" x 44" Faceplate Backing Plate Kit A backing plate kit that mounts behind the faceplate to cover the masonry around the opening for a clean, finished look. Sized 29" x 44".SPECIFICATIONS Dimensions: 29" x 44" Function: Face...

29" x 50" Faceplate Plate A 29" x 50" backing plate that covers the masonry behind a Large faceplate opening for a clean, finished installation.SPECIFICATIONS Dimensions: 29" x 50" Function: Faceplate backing plate Finish: Bla...

3" Ventis PelletVent Pipe Replacement Gasket A replacement sealing gasket for 3" Ventis PelletVent pipe, restoring an airtight, leak-free joint between pipe sections during service or reassembly.SPECIFICATIONS Diameter: 3" Typ...

3" to 2" Ventis PelletVent Fresh Air Intake Adaptor A fresh-air intake adaptor that reduces a 3-inch Ventis PelletVent fresh-air connection to a 2-inch intake, so the outside-air supply can mate with a 2-inch appliance inlet.S...

3" Ventis PelletVent 0/12 to 6/12 Roof Flashing A galvanized roof flashing that weatherproofs the penetration where 3-inch Ventis PelletVent pipe exits a pitched roof, sized for roof slopes from 0/12 (flat) up to 6/12.SPECIFIC...

3" Ventis PelletVent 45-Degree Black Fixed Elbow A 3-inch 45-degree fixed elbow for the Ventis PelletVent system, used to change direction in a pellet vent run. Built with a 304L stainless steel inner and a galvanized outer in...

3" Ventis PelletVent 45-Degree Fixed Elbow (Galvanized) A 3-inch 45-degree fixed elbow for the Ventis PelletVent system, used to change direction in a pellet vent run. Built with a 304L stainless steel inner and a galvanized o...